Ports |
10/100Base-TX: 1 RJ-45, Auto-negotiation and Auto-MDI / MDI-X VDSL: 1 RJ-11, female Phone Jack PHONE: 1 RJ-11, Built-in splitters for POTS connection |
|---|---|
DIP Switch |
4 position DIP switch |
Functionality |
• CO / CPE mode select • Selectable fast and interleaved mode • Selectable target 17a / 30a profiles • Selectable target SNR mode |
Encoding |
• VDSL-DMT - ITU-T G.993.1 VDSL - ITU-T G.997.1 - ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) |
LED Indicators |
• One Power • 4 for RJ-11/VDSL2 • 1 for per RJ-45 10/100Base-TX port |
Cabling Type |
Ethernet 10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft) 100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft) VDSL Twisted-pair telephone wires (AWG24 or better) up to 1.4km |
Performance* (Downstream / Upstream) |
• 17a profile 300m -> 99/70Mbps 400m -> 99/60Mbps 600m -> 90/45Mbps 800m -> 50/28Mbps 1000m -> 40/12Mbps 1200m -> 20/7Mbps 1400m -> 20/4Mbps • 30a profile 300m -> 100/100Mbps 400m -> 90/90Mbps 600m -> 69/55Mbps 800m -> 48/9Mbps |
Power Requirement |
5V DC 2A |
Power Consumption |
7.2 Watts/ 24 BTU |
Dimensions (W x D x H) |
155 x 86 x 26 mm |
Weight |
368g |
Environment |
|
Operating |
Temperature: 0 ~ 50 degrees C Relative Humidity: 10 ~ 90% (non-condensing) |
Storage |
Temperature: -10 ~ 70 degrees C >Relative Humidity: 10 ~ 90% (non-condensing) |
Switch Specifications |
|
Switch Processing Scheme |
Store-and-Forward |
Address Table |
2K entries |
Flow Control |
Back pressure for half duplex IEEE 802.3x Pause Frame for full duplex |
Switch fabric |
0.8Gbps |
Throughput (packet per second) |
0.59Mpps |
Network cables |
10/100Base-TX: 2-Pair UTP Cat. 3,4, 5 (100meters, max.) EIA / TIA-568 100-ohm STP (100meters, max.) |
Standard Conformance |
|
Regulation Compliance |
FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX ITU-T - G.993.1 (VDSL) - G.997.1 - G.993.2 VDSL2 (Profile 17a ) |